Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Brakes/Levers/Pads

$99.99 - $139.99 $109.99 - $139.99 Up to 9% Off
The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
$67.99 - $93.99
TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness
$4.99
Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.
$369.99 - $394.99
- Ergonomic lever blade - Advanced 9mm internal brake lever piston - 5mm hydraulic brake hose - High performance hydraulic brake fluid - Hybrid pistons - High performance resin pad compound - New high flow caliper - 2.3mm thick rotors - CNC machined and marked adapters - Compatible with 223/220/203/180/160/140mm rotors (sold separately) - Weight: 310g (Front without rotor and adapter)
$174.99 - $199.99
TRP HY/RD disc brake calipers have the power and modulation of hydraulic disc brakes. True ‘plug-and-play’ compatibility with existing cable actuated systems. - Self-contained hydraulic caliper incorporates master cylinder - Hydraulic system self-adjusts for pad wear - Compatible with all mechanical road and CX brake levers - Brake pad composite is Resin with Metal Fibers - Resin with Metal Fibers pads are compatible with Resin-Only type rotors as well as standard rotors
$24.99
- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right
$159.99
In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing
$124.99
Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel
$144.99
The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
$59.99 - $69.99
TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring
$89.99
TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness
$94.99 - $99.99
TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.
$51.99
- Set of (6) precision machined Torx T25 titanium disc rotor bolts
Page 1 of 1