Pumps/Inflation

A flat won't ruin your ride when you have Lezyne's Classic Kit. It contains 8 vulcanizing patches, glue, an emergency tire boot and a stainless-steel tube scuffer.

Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.

Two 24g threaded CO2 cartridges with insulation sheath.

Refills … Get your refills here! - Threaded - 16 gram - 3 pack

Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Anyvalve pump head adapts to Presta, Schrader, and Dunlop valves. Details: - Rebuildable internals - Tough aluminum barrel - Ergonomic handle - Includes cage mount - 90 psi max pressure - 162g / 0.35lbs

Lezyne's convenient Twin speed Drive CO2 inflator is compact and lightweight. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.

Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.

Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves. - Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation. - Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike. - Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple. - 45 grams - Lifetime warranty

CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves

The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head comes with two 16 gram threaded cartridges and a sweet little foam cartridge cover that protects from cold cartridges while in use. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits all threaded CO2 cartridge sizes - Alloy mini head with threaded spring push design - Includes two 16g CO2 cartridges - Includes one reusable foam cartridge cover to fit 12g or 16g cartridges

Crank Brothers' Gem Pump packs a powerful punch for its small size and low weight. It'll inflate your tires to 130psi quickly with its dual-piston design. Plus, its aluminum barrel and high-volume/high-pressure (off-road/road tires) settings make inflation easy. The Gem fits Schrader and Presta valves, too.

20g CO2 cartridges contain a mid-sized charge suitable for higher volume gravel tires or similar (Exp. 700c x 40mm / 29" x 1.5").

Park Tool's Micro Pump is a super small micro pump that fits in just about any bag or jersey pocket or mounts directly to the frame. Ideal to take along when space and weight are an issue. Aluminum barrel with a locking dual head and soft-touch dual-density flip out handle. - Presta and Schrader valve compatible - Maximum pressure: 100 psi / 7 bars - Weight: 3.7 ounces (105g) - Length: 7 7/8" (200mm) - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage

Topeak's Pocket Rocket boasts an aluminum barrel for superb function, durability and max pump power, while its plastic handle ensures pumping comfort. And, its aluminum thumb-lock head fits both Presta and Schrader valves.

The longest and slimmest version in the DA pump series fills high-pressure road tires fast. Dual-Action (DA) doubles volume with each stroke and inflates tires to 120 psi / 8 bar. Integrated dust cap keeps pump head clean and thumb lock lever insures air-tight seal. Specs - HEAD: Presta with integrated dust cap - BARREL / THUMB LOCK: Aluminum - HANDLE: Plastic - CAPACITY: 120 psi / 8 bar - VOLUME PER STROKE: 66.9 cc (pull + push) - SIZE: 25.8 x 3.2 x 2.8 cm / 10.2” x 1.3” x 1.1” - WEIGHT: 118 g / 4.16 oz Added Features - Dual-action pumping head - Side-mount bracket

Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation. - Presta- and Schrader-valve compatible - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage - Maximum pressure 90 PSI/6bars - Approximate weight 4.6oz/130 grams - 10.5 inches in length (265mm)

High volume for big tires, high pressure for skinnies. Simple. The Airstick 2-stage is a durable aluminum pump with enough puff for mountain bike tires and enough pressure for road tubes too, thanks to the two-stage high pressure/high volume switch. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum

Compact and powerful, this dual-action pump helps you quickly pump up tires without breaking a sweat. The magic is in the dual-action design, which pumps air into a tire on both push and pull strokes. A great choice for road riders of all types. Details: - Dual stroke design pumps on both inward and outward strokes - AnyValve Pump Head - Tough, lightweight aluminum barrel - Ergonomic folding T-handle - Includes cage mount - 160 psi max pressure - 137g / 0.30lbs

If it was any lighter, you'd be walking home. This is the smallest pump you'll ever use that will still get your flat fixed and you on your way again. There are no extra features here. Just the bare minimum to get your tire back up and you kicking butt. Because you can't kick butt with a flat tire. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum

Essential for your off-road adventures, this pump produces a hurricane-force air blast with its high-volume barrel. The oversized design, made from strong and lightweight aluminum, delivers more air per stroke so you can get back on the trail quickly. Details: - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internal parts available - Tough, lightweight aluminum barrel - Rubberized folding T-handle - Bike mount included - 90 PSI, 6.2 Bar maximum - 145g / 0.32lb

Topeak's CO2-Bra CO2 Inflator gives you speed and convenience when it's time to fix a flat. A flip-up thumb lever puts precise flow control in your hands while the ergonomic handle gives you a better grip while inflating. An integrated safety ring prevents accidental cartridge puncture during storage. The CO2-Bra accepts threaded 16g cartridges and works with both Schrader and Presta valves.

Our lightest pump! At only 59 grams; the only lighter way of getting home after a flat tire might be to call a cab. Fits easily into a jersey pocket, but also will nestle unobtrusively next to your water bottle cage so you'll never leave home without it. We've made this pump with a push-on Presta dedicated head for easy use. Constructed from aluminum, a lightweight and tough material for extra durability and a timeless look. And even the best pump won't do you much good if you've left it in your sock drawer. This pump comes with a discreet frame mount that attaches under your water bottle cage. LIGHTEST PUMP! — At only 59 grams, the only lighter way of getting home after a flat tire is using your phone to call a cab. COMPACT DESIGN — Is that a pump in your pocket? Fits easily into a jersey pocket, but will also nestle unobtrusively next to your bottle cage so you'll never leave home without it. PRESTA-ONLY HEAD — Who is this Schrader anyway? Fewer and fewer folks are running schrader valves, so we've made this pump with a push-on, presta-only head for easy use. ALUMINUM CONSTRUCTION — A lightweight and tough material for extra durability.

Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty

A new All-Mountain standard. Lezyne's threaded 25g CO2 cartridge for use with most Lezyne CO2 inflators. It inflates one large MTB tire (26” x 2.5”) to 40psi (2.8bar).* Sold in packs of five.

Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.

For riders that like to travel light and fast, Topeak's Micro AirBooster CO2 Inflator is an ideal tool. The MicroBooster accepts all threaded cartridges and the head allows for Schrader and Presta valves.

Reach peak inflation pressure in a flash with Topeak's Peak DX II. Its butted-aluminum barrel and folding T-handle makes pumping up tires a snap! Plus, the thumb-lock SmartHead grips tight on both Presta and Schrader valves.

- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible